Invisi-Gard by Verosol Care and Maintenance

CONTENT

Your new Invisi-Gard by Verosol Stainless Steel Security Screens have been manufactured using the highest quality materials available to the security industry.

Mesh Cleaning Kit

Microfibre Soft Mitt & Cleaning Protection Solution
Code: 1409119

Benefits:

  • 2 in 1 Cleaning Protection Solution
  • Non-Toxic Biodegradable Eco & User Friendly
  • Specially developed to clean and protect your Invisi-Gard by Verosol mesh
Constructed from Architectural Grade Aluminium and 316 Stainless Steel Mesh, both of these metals are highly corrosion resistant and exceptionally strong. With a moderate amount of maintenance, your Invisi-Gard manufactured by Verosol Stainless Steel Security Screens will retain their good looks, and resist the elements for years to come.

Invisi-Gard manufactured by Verosol Stainless Steel Security Screens are the product of years of development and are designed to resist corrosion and rusting, but as with all external fixtures on your home, they require some maintenance to keep looking good and performing well. Depending on how harsh the environmental elements are, the maintenance period will vary. Refer to the suggested maintenance table.

Your Invisi-Gard Stainless Steel Security Screens should only ever need to be washed down with a soft-bristled brush using warm mains water and a mild detergent.

Rinse well with mains water to remove any detergent residue paying particular attention to ensuring ALL residue is flushed from the mesh retaining areas of the frame.

Only mains water is to be used as recycled, bore or tank water is unacceptable and may lead to detrimental corrosion effects. Care should be taken to avoid excessive amounts of water entering the main lock and auxiliary 3-point locks.

Strong detergents and abrasive cleaners MUST NEVER be used to clean your Invisi-Gard Stainless Steel Security Screens as these may scratch or damage the surface finish and increase the likelihood of corrosion.

Periodic lubrication of the main lock and auxiliary lock components should only ever be done using graphite powder. Liquid or aerosol lubricants can cause corrosion and damage the locking mechanism.

External contaminants that come into contact with the Invisi-Gard screens such as bird and bat droppings are very acidic and can quickly burn and damage the powder coat finish of the frame and the mesh coating.

To ensure the Invisi-Gard warranty is maintained, it is essential that these external contaminants are cleaned immediately with a mild detergent, soft-bristled brush and rinsed thoroughly with mains water.

Please contact Verosol to order your Invisi-Gard Mesh Cleaning Kit.

 

Suggested Maintenance Schedule

Mild Environment – every 6 months
Greater than 10km radius from oceanfront or saline bay.

Moderate Environment – every 2-3 months
Within 1km to 10km radius from oceanfront or saline bay.

Marine Environment – every 2-3 weeks
Within 500m to 1km radius from oceanfront or saline bay.

Severe Marine – every 1-2 weeks
Within 500m radius from oceanfront or saline bay.